Eline-technology ANPTZ-70-10DN User Manual download pdf (Page 33)

Using the OSD Menu

English

5.3.4 SWING SETUP

You can setup up to 8 swings.

During a swing, the camera moves between 2 Preset positions

repeatedly. When Swing function runs, the camera moves from the

preset assigned as the 1st point to the preset assigned as the 2nd point

in CW (Clockwise) direction. Then, the camera moves from the preset

assigned as the 2nd point to the preset assigned as the 1st point in CCW

(Counterclockwise) direction.

If the preset assigned as the 1st point is the same as the preset assigned

as the 2nd point, camera turns on its axis by 360° in CW (Clockwise)

direction and then it turns on its axis by 360° in CCW (Counterclockwise)

direction.

Speed can be set up from 1° / sec to 180° / sec.

To run a swing using keyboard controller shortcuts:

• Press [141~148] and then press [Pr

eset] to runs swings 1 ~ 8.

To create swings:

1. Setup the desired presets you would like to use to create Swings.

Using the OSD Menu

2. Go to the Swing Setup menu (Menu>Dome Camera Setup>Swing

Setup).

3. Configure the following:

• SWING NUMBER [1~8]: Selects Swing number to edit. If a selected

Swing has not defined, NOT USED is displayed under 1st Position and

2nd Position.

• 1ST/2ND POSITION [PRESET 1~128]: Set up the 2 positions for Swing

function. If a selected preset is not defined, UNDEFINED will be

displayed under the 2nd Position.

• SWING SPEED [1°/sec~180°/sec]: Sets Swing speed from 1° / sec to

180° / sec.

• CLEAR SWING [CANCEL/OK]: Select OK and press [Near] to delete

current Swing data.

5.3.5 PATTERN SETUP

You can set up to 4 Patterns with a maximum of 1200 communication

commands each.

Creating a Pattern memorizes a path (mostly curve path) defined by the

keyboard controller to be run later.

Patterns can be created using keyboard controller shortcuts or the OSD

menu.

eLineTechnology.com

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 41 42

No comments

Eline-technology ANPTZ-70-10DN User Manual Page 33