Eline-technology ANPTZ-70-10DN User Manual download pdf (Page 29)

Using the OSD Menu

English

5.3.2 MOTION SETUP

Motion Setup allows you to setup the motion settings of the camera.

• MOTION LOCK [ON/OFF]: When set to ON, Motion Lock prevents

Presets, Auto Pans, Patterns and Groups from being overwritten

using the keyboard controller shortcuts. You may still run those

functions using shortcuts or edit them using the OSD menu.

• POWER UP ACTION [ON/OFF]: When set to ON, after starting up, the

camera will resume the last action executed before powering down.

Preset, Pattern, Swing and Group may be resumed but Jog actions

may not be resumed.

• AUTO FLIP [ON/OFF]: When set to ON, image is automatically flipped

when tilt goes past 90°. When set to OFF, tilt is limited to 90°.

• JOG MAX SPEED [1~360/Sec]: Sets maximum jog speed. Jog speed

is inv

ersely proportional to zoom magnification. As zoom

magnification goes up, pan/tilt speed goes down.

• JOG DIRECTION [INVERSE/NORMAL]: When set to NORMAL, pan/tilt

moves in the same direction as the joystick. If set to INVERSE, pan/

tilt moves in the opposite direction.

• FREEZE IN PRESET [ON/OFF]: If set to ON, image freezes while

moving between presets.

Using the OSD Menu

Parking Action Setup

Parking action runs an assigned command if the controller is idle for a

set time between 1 minute and 4 hours.

• PARK ENABLE [ON/OFF]: Enable/disable parking action.

• W

AIT TIME [1 minutes~4 hours]: The time is displayed in "hh:mm:ss"

format.

• P

ARK ACTION [HOME/PRESET/PATTERN/SWING/GROUP]: Action

taken after Wait Time. If HOME is selected, camera will move to home

position.

Alarm Input Setup

Match the Alarm sensor input to an action. If an external sensor is

activated, camera will move to the corresponding preset position or

perform the corresponding action.

eLineTechnology.com

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 41 42

No comments

Eline-technology ANPTZ-70-10DN User Manual Page 29